، کمال تقدیر و تشکر به عمل میآید.
مراجع
R. D. Morrison and P. W. Cleary, "Using DEM to compare the energy efficiency of pilot scale ball and tower mills," Minerals Engineering, vol. 22, pp. 665–672, 2009.
[2] M. Maleki-Moghaddam, M. Yahyaei, and S. Banisi, "Converting AG to SAG mills: The Gol-E-Gohar Iron Ore Company case," Powder Technologyvol. 217, pp. 100–106, 2012.
[3] M. Maleki-Moghaddam, M. Yahyaei, and S. Banisi, "A method to predict shape and trajectory of charge in industrial mills," Minerals Engineering,vol. 46-47, pp. 157–166, 2013.
[4] M. Yahyaei and S. Banisi, "Spreadsheet-based modeling of liner wear impact on charge motion in tumbling mills," Minerals Engineering, vol. 23, pp. 1213-1219, 2010.
[5] S. Morrell, "The prediction of power draw in wet tumbling mills," PhD Thesis, The University of Queensland, School of Engineering, 1993.
[6] S. Martins, W. Li, P. Radziszewski, A. Faucher, and S. Makni, "Experimental and simulated instrumented ball in a tumbling mill—A comparison," Minerals Engineering, vol. 43–44, pp. 79-84, 2013.
[7] P. A. Cundall, "A discrete numerical model for granular assemblies," Geotechnique,vol. 29, pp. 47-65, 1979.
[8] B. K. Mishra and R. K. Rajamani, "The discrete element method for the simulation of ball mills," Applied Mathematical Modelling,vol. 16, no. 11, pp. 598-604, 1992.
[9] P. W. Cleary, "Predicting charge motion, power draw, segregation and wear in ball mills using discrete element methods," Minerals Engineering,vol. 11, pp. 1061-1080, 1998.
[10] N. Djordjevic, R. Morrison, and B. Loveday, "Modelling comminution patterns within a pilot scale AG/SAG mill," Minerals Engineering,vol. 19, pp. 1505–1516, 2006.
[11] A. Refahi, J. Aghazadeh Mohandesi, and B. Rezai, "Discrete element modeling for predicting breakage behavior and fracture energy of a single particle in a jaw crusher," International Journal of Mineral Processing,vol. 94, no. 1–2, pp. 83-91, 2010.
[12] M. Rezaeizadeh, M. Fooladi, M. S. Powell, and S. H. Mansouri, "Experimental observations of lifter parameters and mill operation on power draw and liner impact loading," Minerals Engineering,vol. 23, no. 15, pp. 1182-1191, 2010.
[13] M. Jahani, A. Farzanegan, and M. Noaparast, "Investigation of screening performance of banana screens using LIGGGHTS DEM solver," Powder Technology,vol. 283, pp. 32-47, 2015.
[14] L. Xu, K. Luo, and Y. Zhao, "Numerical prediction of wear in SAG mills based on DEM simulations," Powder Technology,vol. 329, pp. 353-363, 2018.
[15] X. Bian, G. Wang, H. Wang, S. Wang, and W. Lv, "Effect of lifters and mill speed on particle behaviour, torque, and power consumption of a tumbling ball mill: Experimental study and DEM simulation," Minerals Engineering,vol. 105, pp. 22-35, 2017.
[16] P. Gy, "Sampling of particulate materials: Theory and Practice," Elsevier, 1979.
[17] قاسمی، علیرضا؛ موسوی، سیدامید؛ بنیسی، صمد؛ 1392؛ "تأثیر گام زمانی بر دقت نتایج در شبیهسازی حرکت ذرات به روش اجزای گسسته (راگ)," روش های عددی و تحلیلی در مهندسی معدن، جلد شش، صفحات 23 تا 32.
[18] P. Cleary, "Discrete element modeling of industrial granular flow applications," Task quarterly 2 no 3, vol. 2, pp. 385-416, 1998.
[19] M. Maleki-Moghaddam, A. R. Ghasemi, M. Yahyaei, and S. Banisi, "The impact of end-wall effect on the charge trajectory in tumbling model mills," International Journal of Mineral Processing,vol. 144, pp. 75-80, 2015.
[20] S. Lommen, D. Schott, and G. Lodewijks, "DEM speedup: Stiffness effects on behavior of bulk material," Particuology, vol. 12, pp. 107-112, 2014.