Document Type : research - paper
Authors
1 phd student
2 Professor
3 shahrood university of technology
4 Assistant professor, Faculty of Technical & Engineering, Imam Khomeini International University
5 4Professor, Department of Technology and Safety, UiT the Arctic University of Norway
Abstract
Keywords
Main Subjects
#B. Rod, A. Barabadi, and M. Naseri, “Recoverability Modeling of Power Distribution Systems Using Accelerated Life Models: Case of Power Cut due to Extreme Weather Events in Norway,” Journal of Management in Engineering, vol. 36, no. 5, p. 05020012, 2020.# #R. Zaki, A. Barabadi, J. Barabadi, and A. N. Qarahasanlou, “Observed and unobserved heterogeneity in failure data analysis:,” Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, Jun. 2021, doi: 10.1177/1748006X211022538.# #J. S. Kiddy, “Remaining useful life prediction based on known usage data,” 2003, pp. 11–18.# #A. Ghomghale, M. Ataei, R. Khalokakaie, A. Barabadi, and A. Nouri Qarahasanlou, “The Application of Frailty Model in Remaining Useful Life Estimation (Case Study: Sungun Copper Mine’s Loading System),” Journal of Modeling in Engineering, vol. 18, no. 62, Oct. 2020, doi: 10.22075/jme.2020.19249.1817.# #A. Ghomghaleh et al., “Prediction of remaining useful life (RUL) of Komatsu excavator under reliability analysis in the Weibull-frailty model,” Plos one, vol. 15, no. 7, p. e0236128, 2020.# #R. Barabadi, M. Ataei, R. Khalokakaie, and A. Nouri Qarahasanlou, “Spare-part management in a heterogeneous environment,” Plos one, vol. 16, no. 3, p. e0247650, 2021.# #R. Hall and L. Daneshmend, “Evaluation of mining equipment automation including process considerations and sensitivity analysis,” in Mine Planning and Equipment Selection 2000, Routledge, 2018, pp. 709–713.# #R. A. Hall and L. K. Daneshmend, “Reliability and maintainability models for mobile underground haulage equipment,” Canadian Institute of Mining, Metallurgy and Petroleum (CIM) bulletin, vol. 96, no. 1072, pp. 159–165, 2003.# #U. Kumar and B. Klefsjö, “Reliability analysis of hydraulic systems of LHD machines using the power law process model,” Reliability Engineering & System Safety, vol. 35, no. 3, pp. 217–224, 1992, doi: 10.1016/0951-8320(92)90080-5.# #U. Kumar, “Reliability Analysis of Load-Haul-Dump Machines,” Phd Thesis, Lulea University of Technology, Lulea, Sweden, 1990.# #N. Vagenas, V. Kazakidis, M. Scoble, and S. Espley, “Applying a maintenance methodology for excavation reliability,” International Journal of Surface Mining, Reclamation and Environment, vol. 17, no. 1, pp. 4–19, 2003.# #M. M. Grujic, M. M. Grujic, and M. D. Ivkovic, “The impact of multi-element external coal transportation on reliability of the system and on environment,” in Mine Planning and Equipment Selection 2000, Routledge, 2018, pp. 569–572.# #N. Vagenas, N. Runciman, and S. R. Clément, “A methodology for maintenance analysis of mining equipment,” International Journal o/Surface Mining, Reclamation and Environment, vol. 11, no. 1, pp. 33–40, 1997.# #B. Samanta, B. Sarkar, and S. Mukherjee, “Reliability modelling and performance analyses of an LHD system in mining,” South African Institute Mining And Metallurgy, vol. 104, pp. 1–8, 2004.# #J. Barabady and U. Kumar, “Reliability analysis of mining equipment: A case study of a crushing plant at Jajarm Bauxite Mine in Iran,” Reliability Engineering & System Safety, vol. 93, no. 4, pp. 647–653, Apr. 2008, doi: 10.1016/j.ress.2007.10.006.# #J. Barabady and U. Kumar, “Maintenance Schedule by Using Reliability Analysis: A Case Study at Jajram Bauxite Mine of Iran,” Tehran, Iran, 2005, vol. 2, pp. 831–838.# #J. Barabady, “Reliability and maintainability analysis of crushing plants in Jajarm Bauxite Mine of Iran,” 2005, pp. 109–115.# #N. Vayenas and X. Wu, “Maintenance and reliability analysis of a fleet of load-haul-dump vehicles in an underground hard rock mine,” International Journal of Mining, Reclamation and Environment, vol. 23, no. 3, pp. 227–238, 2009.# #N. G. Ali, K. Reza, A. Mohammad, and M. Ashkan, “Reliability Analysis of Conveyor Belt System of Crushing Department,” in CIVILICA, 2015, vol. 01. Accessed: Jan. 29, 2017. [Online]. Available: http://www.civilica.com/Paper-RSTCONF01-RSTCONF01_115=Reliability-Analysis-of-Conveyor-Belt-System-of-Crushing-Department.html# #N. G. Ali, K. Reza, A. Mohammad, and M. Ashkan, “Power Law Model for Reliability Analysis of Crusher System in Khoy Cement Factory,” in CIVILICA, 2015, vol. 01. Accessed: Jan. 29, 2017. [Online]. Available: http://www.civilica.com/Paper-RSTCONF01-RSTCONF01_057=Power-Law-Model-for-Reliability-Analysis-of-Crusher-System-in-Khoy-Cement-Factory.html# #A. N. Gharahasanlou, M. Ataei, R. Khalokakaie, A. Barabadi, and V. Einian, “Risk based maintenance strategy: a quantitative approach based on time-to-failure model,” International Journal of System Assurance Engineering and Management, pp. 1–10, Mar. 2017, doi: 10.1007/s13198-017-0607-7.# #A. Nouri Qarahasanlou, “Production Assurance of Mining Fleet Based on Dependability and Risk Factor (Case Study: Sungun Copper Mine),” PhD Thesis in Mineral Exploita, Shahrood University of Technology Faculty of Mining, Petroleum & Geophysics, Iran, Shahrood, 2017.# #A. Nouri Qarahasanlou, A. Mokhtarei, A. Khodayarei, and M. Ataei, “Fault tree analysis of failure cause of crushing plant and mixing bed hall at Khoy cement factory in Iran,” Case Studies in Engineering Failure Analysis, vol. 2, no. 1, pp. 33–38, 2014, doi: 10.1016/j.csefa.2013.12.006.# #A. Nouri Gharahasanlou, R. Khalokakaie, M. Ataei, and S. Fatorachi, “Availability analysis of mining machinery in Sungun copper mine,” Journal of Research-Papers Mineral Resources Engineering, vol. 1, no. 2, pp. 61–72, Feb. 2017.# #D. Kumar and B. Klefsjö, “Proportional hazards model: a review,” Reliability Engineering & System Safety, vol. 44, no. 2, pp. 177–188, 1994.# #D. Kumar and U. Westberg, “Proportional hazards modeling of time-dependent covariates using linear regression: a case study [mine power cable reliability],” Reliability, IEEE Transactions on, vol. 45, no. 3, pp. 386–392, 1996.# #B. Ghodrati, “Weibull and Exponential Renewal Models in Spare Parts Estimation: A Comparison,” International Journal of Performability Engineering, vol. 2, no. 2, p. 135, 2006.# #B. Ghodrati, U. Kumar, and D. Kumar, “Product support logistics based on product design characteristics and operating environment,” presented at the Annual International Logistics Conference and Exhibition: 12/08/2003-14/08/2003, 2003.# #B. Ghodrati and U. Kumar, “Operating Environment Based Maintenance and Spare Parts Planning: A Case Study,” 2004, p. 125.# #B. Ghodrati and U. Kumar, “Operating environment-based spare parts forecasting and logistics: a case study,” International Journal of Logistics Research and Applications, vol. 8, no. 2, pp. 95–105, 2005, doi: 10.1080/13675560512331338189.# #B. Ghodrati, D. Benjevic, and A. Jardine, “Product support improvement by considering system operating environment: A case study on spare parts procurement,” International Journal of Quality & Reliability Management, vol. 29, no. 4, pp. 436–450, Apr. 2012, doi: 10.1108/02656711211224875.# #A. Barabadi, J. Barabady, and T. Markeset, “A methodology for throughput capacity analysis of a production facility considering environment condition,” Reliability Engineering & System Safety, vol. 96, no. 12, pp. 1637–1646, 2011, doi: 10.1016/j.ress.2011.09.001.# #A. Nouri Qarahasanlou, M. Ataei, R. Khalokakaie, S. Fatoorachi, and R. Barabady, “Operating Environment Based Reliability Analysis of Mining Equipment Case Study: Molybdenum-Copper Mine (Sungun Copper Mine),” Journal of Analytical and Numerical Methods in Mining Engineering, vol. 9, no. 18, pp. 129–141, Apr. 2019.# #A. Nouri Qarahasanlou, M. Ataei, R. Khaolukakaie, B. Ghodrati, and M. Mokhberdoran, “Maintainability measure based on operating environment, a case study: Sungun copper mine,” Journal of Mining and Environment, 2016.# #A. Moniri-Morad, M. Pourgol-Mohammad, H. Aghababaei, and J. Sattarvand, “Reliability-based covariate analysis for complex systems in heterogeneous environment: Case study of mining equipment,” Proceedings of the IMechE, p. 1748006X18807091, Oct. 2018, doi: 10.1177/1748006X18807091.# #G. Watson and W. Wells, “On the possibility of improving the mean useful life of items by eliminating those with short lives,” Technometrics, vol. 3, no. 2, pp. 281–298, 1961.# #E. A. Elsayed, “Mean residual life and optimal operating conditions for industrial furnace tubes,” Case studies in reliability and maintenance, pp. 497–515, 2003.# #M. Xie, T. N. Goh, and Y. Tang, “On changing points of mean residual life and failure rate function for some generalized Weibull distributions,” Reliability Engineering & System Safety, vol. 84, no. 3, pp. 293–299, Jun. 2004, doi: 10.1016/j.ress.2003.12.005.# #B. Ghodrati, U. Kumar, and F. Ahmadzadeh, “Remaining useful life estimation of mining equipment: a case study,” presented at the International Symposium on Mine Planning and Equipment Selection: 28/11/2012-30/11/2012, 2012.# #L. Wang, L. Zhang, and X. Wang, “Reliability estimation and remaining useful lifetime prediction for bearing based on proportional hazard model,” J. Cent. South Univ., vol. 22, no. 12, pp. 4625–4633, Dec. 2015, doi: 10.1007/s11771-015-3013-9.# #R. Khelif, B. Chebel-Morello, S. Malinowski, E. Laajili, F. Fnaiech, and N. Zerhouni, “Direct Remaining Useful Life Estimation Based on Support Vector Regression,” IEEE Transactions on Industrial Electronics, vol. 64, no. 3, pp. 2276–2285, Mar. 2017, doi: 10.1109/TIE.2016.2623260.# #Y. Wu, M. Yuan, S. Dong, L. Lin, and Y. Liu, “Remaining useful life estimation of engineered systems using vanilla LSTM neural networks,” Neurocomputing, vol. 275, pp. 167–179, Jan. 2018, doi: 10.1016/j.neucom.2017.05.063.# #“IEC 60050 - International Electrotechnical Vocabulary - Details for IEV number 191-02-06: ‘reliability (performance),’” Jan. 24, 2014. http://www.electropedia.org/iev/iev.nsf/display?openform&ievref=191-02-06 (accessed Jan. 24, 2014).# #“IEC 60050 - International Electrotechnical Vocabulary - Details for IEV number 191-04-01: ‘failure,’” Jan. 24, 2014. http://www.electropedia.org/iev/iev.nsf/display?openform&ievref=191-04-01 (accessed Jan. 24, 2014).# #Z. Ma, “Survival analysis approach to reliability, survivability and prognostics and health management (phm),” 2008, pp. 1–20.# #B. S. Dhillon, Mining equipment reliability, maintainability, and safety. Springer, 2008.# #M. Pijnenburg, “Additive hazards models in repairable systems reliability,” Reliability Engineering & System Safety, vol. 31, no. 3, pp. 369–390, 1991.# #D. R. Cox, “Regression models and life-tables,” Journal of the Royal Statistical Society. Series B (Methodological), pp. 187–220, 1972.# #S. Martorell, A. Sanchez, and V. Serradell, “Age-dependent reliability model considering effects of maintenance and working conditions,” Reliability Engineering & System Safety, vol. 64, no. 1, pp. 19–31, 1999.# #U. Kumar, B. Klefsjö, and S. Granholm, “Reliability investigation for a fleet of load haul dump machines in a Swedish mine,” Reliability Engineering & System Safety, vol. 26, no. 4, pp. 341–361, Jan. 1989, doi: 10.1016/0951-8320(89)90004-5.# #B. Ghodrati, “Reliability and operating environment based spare parts planning,” Doctoral Thesis, Luleå University of Technology, Sweden, 2005.# #D. G. Kleinbaum, Survival analysis. Springer, 2011.# #S. Lakshmi and P. G. Sundari, “A new mathematical model in weibull proportional hazards regression using GABAA,” Bulletin of Pure & Applied Sciences-Mathematics and Statistics, vol. 31, no. 1, pp. 101–107, 2012.# #A. Barabadi, J. Barabady, and T. Markeset, “Application of accelerated failure model for the oil and gas industry in Arctic region,” 2010, pp. 2244–2248.# #N. Gorjian Jolfaei, “Asset health prediction using the explicit hazard model,” Queensland University of Thechnology, 2012.# #P. Prasad and K. Rao, “Reliability models of repairable systems considering the effect of operating conditions,” 2002, pp. 503–510.# #A. Barabadi, J. Barabady, and T. Markeset, “Maintainability analysis considering time-dependent and time-independent covariates,” Reliability Engineering & System Safety, vol. 96, no. 1, pp. 210–217, 2011.# #C. Xiongzi, Y. Jinsong, T. Diyin, and W. Yingxun, “Remaining useful life prognostic estimation for aircraft subsystems or components: A review,” 2011, vol. 2, pp. 94–98.# #D. G. Kleinbaum and M. Klein, “Survival Analysis: A Self-Learning Text,” Springer Science & Business Media, 2012.# #M. Cleves, W. Gould, W. W. Gould, R. Gutierrez, and Y. Marchenko, An introduction to survival analysis using Stata. Stata press, 2016.# #E. George, W. G. Hunter, and J. S. Hunter, Statistics for experimenters: design, innovation, and discovery. Wiley, 2005.#