منابع [۱] نجفی ثانی، حسن؛ برادران سید، ابوالفضل؛1391 ؛«طراحی و توسعه سرمتههای PDC»، پایان نامه کارشناسی ارشد، دانشگاه صنعتی امیرکبیر## [۲] نقی خانی، مهدی؛ علی محمدی، حمیدرضا؛1390؛ «استفاده از طرح رویه پاسخ (RSM) در تخصیص بهینه تلرانس»، فصلنامه علوم و فناوری فضایی، سال چهارم، شماره 2-1، ص 61-68.## [3] B. Changgen; Q. Yegao; C. Zhiqiang; L. Baolin; 2009; “Numerical Simulation of Impact on Pneumatic DTH Hammer Percussive Drilling", Journal of Earth Science, Vol. 20, No. 5, pp. 868–878.## [4] B. Ulrik; J. Staffan; 2008; "A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons", Wear, pp. 29–41.## [5] Richard G; Budynas and J. Keith Nisbett; 2011; "Shigley’s Mechanical Engineering Design", Ninth Edition", McGraw-Hill, New York.## [6] Y. Fan; Z. Huang; D. Gao; Q. Li; 2011; "Experimental study of an Al2O3/WC–Co nanocomposite based on a failure analysis of hammer bit", Engineering Failure Analysis, pp. 1351-1358. ## [7] I. NORTHROP; 1987; "The joining of tungsten carbide hardmetal to steel", J. S. At. Inst. Min. Metall., vol. 87, no. 5, pp. 125-135. ## [8] Y. Zhang, B. McClain, X.D. Fang, 2000; "Design of interference fits via finite element method", International Journal of Mechanical Sciences 42, pp. 1835-1850.## [9] S. Sen, B. Aksakal, 2004; "Stress analysis of interference fitted shaft–hub system under transient heat transfer conditions", Materials and Design 25, pp. 407–417.## [10] Xu Zhang, Hao Jiang, Tong Luo, et al. 2019; "Theoretical and experimental investigation on interference fit in electromagnetic riveting", International Journal of Mechanical Sciences. Accepted manuscript.## [11] L. E. Chiang, D. A. Elı´as, 2008; "A 3D FEM methodology for simulating the impact in rock-drilling hammers", International Journal of Rock Mechanics & Mining Sciences, pp. 701–711.## [12] L.P. Franca, 2011; "A bit–rock interaction model for rotary–percussive drilling", International Journal of Rock Mechanics & Mining Sciences, pp. 827–835. ## [13] Timo Saksala, Marion Fourmeau, Pascal-Alexandre Kane, and Mikko Hokka, 2018; "3D finite elements modelling of percussive rock drilling: Estimation of rate of penetration based on multiple impact simulations with a commercial drill bit", Computers and Geotechnics, 55–63.## [14] E.J. HEARN, 1997; "Mechanics of Materials 1 (Third Edition)", pp. 215-253. ## [15] Hibbitt, Karlsson and Sorensen, Inc. 2013; "ABAQUS analysis user's manual help online", SIMULIA.## [16] A. ORD, I. VARDOULAKIS, R. KAJEWSKI, 1991; "Shear Band Formation in Gosford Sandstone", Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. Vol. 28. No. 5, pp. 397-409.## [17] Y.B. Lu, Q.M. Li, G.W. Ma, 2010; "Numerical investigation of the dynamic compressive strength of rocks based on split Hopkinson pressure bar tests", International Journal of Rock Mechanics & Mining Sciences 47, pp. 829–838.## [18] G. Mauricio, 2014; "Soft rocks in Argentina", International Journal of Mining Science and Technology 24, pp. 883–892. [19] T. Saksala, M. Hokka, V. Kuokkala, J. Makinen, 2013; "Numerical modeling and experimentation of dynamic Brazilian disc test on Kuru granite", International Journal of Rock Mechanics & Mining Sciences 59, pp. 128–138.## [20]J. Ma, N.H. Duong, S. Lei, 2015; "Numerical Investigation of the performance of microbump textured cutting tool in dry machining of AISI 1045 steel", Journal of Manufacturing Processes 19, pp. 194–204.## [21]A. Nordgrena, B.Z. Samani, R. M´Saoubi, 2014; "Experimental Study and Modelling of Plastic Deformation of Cemented Carbide Tools in Turning", Procedia CIRP 14, pp. 599–604.##
