@article { author = {Shenavar, Morteza and Ataeepour, M and Rahmanpour, Mehdi}, title = {Optimization of Long-Term Production Planning in Sublevel caving Method}, journal = {Journal of Mining Engineering}, volume = {16}, number = {52}, pages = {41-50}, year = {2021}, publisher = {Iranian Society of Mining Engineering (IRSME)}, issn = {1735-7616}, eissn = {2676-4482}, doi = {10.22034/ijme.2020.122373.1790}, abstract = {Production planning in underground mines is still a manual process and there are no suitable tools for optimal production planning for these mines. It is impossible to achieve a real optimum result through manual programming because of the complexity of underground mines and production planning problems in these mines. Due to the increasing consumption of minerals on one hand and the depth of mineral reserves, on the other hand, efforts to achieve comprehensive production planning optimization methods in underground mines and especially large-scale production methods with high production rates are inevitable. Among the underground mining methods, sublevel caving is a common method for hard rock mining, and there are very few studies of long-term production planning for this method. In this paper, a new mathematical model with the aim of maximizing the net present value (NPV) is presented to optimize the production planning of the sublevel caving method. The technical and operational constraints of the sublevel caving method such as development constraints, production capacity, sublevels geometry, and storage access are included in this model. The proposed model was implemented on an economic block model and the maximum NPV was determined. A comparison of the results obtained with the results of manual planning shows a significant increase in NPV mining operations.}, keywords = {Optimization,Production Planning,Underground mining,Net Present Value,Sublevel caving}, title_fa = {بهینه‌سازی برنامه‌ریزی تولید بلندمدت در روش استخراج تخریب در طبقات فرعی}, abstract_fa = {برنامه‌ریزی تولید در معادن زیرزمینی همچنان یک فرآیند طراحی دستی است و ابزارهای مناسب برای تهیه برنامه‌ریزی تولید بهینه برای این معادن وجود ندارد. دستیابی به نتیجه بهینه واقعی از طریق برنامه‌ریزی دستی به دلیل پیچیدگی معادن زیرزمینی و مشکلات برنامه‌ریزی تولید در این معادن امری غیرممکن است. با توجه به افزایش روز افزون مصرف مواد معدنی از یک طرف و افزایش عمق ذخایر معدنی از طرف دیگر، تلاش برای دستیابی به روش‌های جامع بهینه‌سازی برنامه‌ریزی تولید در معادن زیرزمینی و به ویژه روش‌های استخراج بزرگ مقیاس با آهنگ تولید بالا اجتناب‌ناپذیر است. از بین روش‌های استخراج زیرزمینی، روش استخراج تخریب در طبقات فرعی روشی متداول برای استخراج سنگ‌های سخت با آهنگ تولید بالا است و مطالعات بسیار محدودی در زمینه برنامه‌ریزی تولید بلندمدت برای این روش وجود دارد. در این مقاله، برای بهینه‌سازی برنامه‌ریزی تولید روش استخراج تخریب در طبقات فرعی، یک مدل جدید ریاضی با هدف بیشینه کردن ارزش خالص فعلی (NPV) ارایه شده است. محدودیت‌های فنی و اجرایی روش استخراج تخریب در طبقات فرعی مانند محدودیت‌های بازکننده‌ها و آماده‌سازی‌ها، ظرفیت تولید، هندسه طبقات فرعی و دسترسی به ذخیره در این مدل منظور شده‌اند. مدل ارایه شده بر روی یک مدل بلوکی اقتصادی اجرا و حداکثر NPV تعیین شد. مقایسه نتایج به دست آمده با نتایج حاصل از روش برنامه‌ریزی دستی، افزایش قابل توجهی در NPV عملیات معدنکاری را نشان می‌دهد.}, keywords_fa = {بهینه‌سازی,برنامه‌ریزی تولید,معدنکاری زیرزمینی,ارزش خالص فعلی,تخریب در طبقات فرعی}, url = {https://ijme.iranjournals.ir/article_241792.html}, eprint = {https://ijme.iranjournals.ir/article_241792_5c9b3441076e2397ba747ca08580fb07.pdf} }