@article { author = {نخعی, فردیس and ایران نژاد, مهدی}, title = {Effective Parameters on Gas Dispersion Variables in Flotation Columns}, journal = {Journal of Mining Engineering}, volume = {10}, number = {28}, pages = {27-33}, year = {2015}, publisher = {Iranian Society of Mining Engineering (IRSME)}, issn = {1735-7616}, eissn = {2676-4482}, doi = {}, abstract = {The crucial role of bubble surface area flux (Sb) and gas hold-up (εg) in flotation columns efficiency has been proved. This research examines the effect of gas flow rate, feed rate, frother concentration, froth height, particle size and solid percent variables on gas dispersion parameters (gas hold-up and bubble surface area flux). Test work has been conducted in a column with 10 cm diameter and 400 cm height. Feed to flotation column has been provided by rougher mechanic cell concentrate of Miduk copper complex. Gas hold-up has been measured by pressure difference method and bubble size has been estimated by drift flux analysis. The results of the study reveal that superficial gas velocity and frother rate have a positive impact on bubble surface area flux; however, the increase of pulp solid percent leads to a drop in Sb. Studies on the gas dispersion parameters in flotation columns show that although gas hold-up decreases due to the improvement of feed flow rate, its effect, in comparison to the air flow rate and frother rate, is negligible. Gas hold-up decreases in collection zone when solid percent increases and this decreasing rate has become more significant in coarser particles. Likewise, by decreasing the froth height, low reduction can be observed in gas hold-up. Finally, a model for prediction of Sb on the basis of εg has been carefully presented by the use of statistical methods.  }, keywords = {Flotation Column,Gas Hold-up,Bubble Surface Area Flux,Gas Dispersion}, title_fa = {بررسی عوامل موثر در انتشار جریان هوا در ستون فلوتاسیون}, abstract_fa = {پارامترهای انتشار گاز نظیر نرخ ظاهری سطح حباب(Sb) و ماندگی گاز (εg) در کارایی عملکرد ستون‌های فلوتاسیون موثر هستند. در این مقاله تأثیر سرعت جریان گاز و خوراک ورودی، غلظت کف‌ساز، ارتفاع کف، ابعاد ذرات و درصد جامد خوراک ورودی روی پارامترهای انتشار گاز بررسی شده است. آزمایش ها در ستونی با جنس پلاکسی گلاس با قطر 10 و ارتفاع 400 سانتیمتر انجام شد. ماندگی گاز با استفاده از روش اختلاف فشار اندازه گیری شد و اندازه حباب از روش تحلیل جابجایی شار تخمین زده شد. نتایج آزمایش‌ها نشان داد که با افزایش سرعت ظاهری گاز و میزان کف‌ساز، نرخ ظاهری سطح حباب افزایش می‌یابد، در حالیکه افزایش درصد جامد خوراک ورودی کاهش Sb و εg  را به دنبال دارد. اگرچه ماندگی گاز به دلیل افزایش در سرعت جریان خوراک کاهش می‌یابد ولی تأثیر آن در مقایسه با سرعت جریان گاز و میزان کف‌ساز قابل چشم پوشی است. با کاهش ارتفاع ناحیه کف ستون فلوتاسیون از 110 به 70 سانتیمتر، کاهش جزئی در ماندگی گاز در منطقه جمع‌آوری مشاهده می‌شود و این نرخ با افزایش سرعت جریان گاز افزایش می‌یابد. تأثیر ابعاد ذرات بر ماندگی گاز در دو دامنه ابعادی 100-150 میکرون و 45-63 میکرون نشان داد که با کاهش ابعاد ذرات ماندگی گاز کاهش می‌یابد. با استفاده از روش های آماری، مدلی برای پیش‌بینی نرخ ظاهری سطح حباب بر اساس ماندگی گاز با دقت بسیار بالایی ارائه شده است.}, keywords_fa = {ستون فلوتاسیون,ماندگی گاز,نرخ ظاهری سطح حباب,انتشار گاز}, url = {https://ijme.iranjournals.ir/article_14635.html}, eprint = {https://ijme.iranjournals.ir/article_14635_d9fa179ae36a53d4e6dd9c650ab0d60f.pdf} }