@article { author = {hosseini, mohammad and Madani, Hasan and Asadi, Ahmad}, title = {New Equations for Calculation of Piston Wind on Exit Corridor of Subway Stations}, journal = {Journal of Mining Engineering}, volume = {9}, number = {25}, pages = {1-11}, year = {2015}, publisher = {Iranian Society of Mining Engineering (IRSME)}, issn = {1735-7616}, eissn = {2676-4482}, doi = {}, abstract = {Moving a train in a tunnel move the air forward, due to restrictions on the walls, a phenomenon called piston effect. Piston effect creates piston wind on the exit corridor of subway stations which may cause inconvenience to passengers particularly during the cold seasons of year. Most of the calculations carried out on the piston wind at exit corridor of subway stations are based on three-dimensional modelling and dynamic mesh method using ANSYS and FLUENT softwares. Despite having high precision, these methods suffer disadvantages such as heavy mathematical computation and necessity of using super computers which limits applicability of these methods. In this study new method based on one dimensional equations of fluid motions has been developed using MATLAB software. Validation of this model has been examined based on data from Taleghani Metro Station in Tehran. Comparison of the real data with model calculation approves high accuracy of proposed model.  }, keywords = {Piston effect,one dimensional simulation,Navier-Stokes equation,Subway ventilation}, title_fa = {ارائه رابطه جدید برای محاسبه اثر پیستونی قطارهای مترو در خروجی‌های ایستگاه‌ها}, abstract_fa = {حرکت قطار در تونل، با توجه به محدودیت دیواره‌ها، باعث حرکت هوا به سمت جلو می شود. این پدیده اثر پیستونی نام دارد. یکی از تاثیرات حرکت پیستونی قطار، ایجاد باد پیستونی در خروجی‌های ایستگاه مترو است که باعث ناراحتی مسافران به ویژه در فصول سرد سال می‌شود. محاسبات انجام شده در زمینه محاسبه باد پیستونی در خروجی ایستگاه‌ها، معمولا به وسیله مدل‌سازی‌های سه بعدی با استفاده از نرم افزارهای FLUENT و ANSYS انجام گرفته است که طی آن از روش شبکه بندی دینامیکی استفاده می‌شود. یکی از معایب این روش، طولانی بودن زمان انجام محاسبات و احتیاج به سیستم‌های با قدرت پردازش بالا است که کارآیی این روش را علی رغم دقت بالا، با محدودیت مواجه کرده است. در این مطالعه با استفاده از مدل‌سازی یک بعدی حرکت سیال و استفاده از نرم‌افزار MATLAB، روش جدیدی معرفی شده است که زمان انجام محاسبات را کاهش می‌دهد. به منظور اعتبار سنجی این روش، محاسبات در ایستگاه مترو طالقانی تهران اجرا و با مقادیر اندازه‌گیری شده در خروجی این ایستگاه مقایسه شده است. نتایج نشان دهنده آن است که این روش دقت نسبتا بالایی دارد.}, keywords_fa = {اثر پیستونی,مدل‌سازی یک بعدی,معادلات ناویر استوکی,تهویه ایستگاه‌های مترو}, url = {https://ijme.iranjournals.ir/article_13561.html}, eprint = {https://ijme.iranjournals.ir/article_13561_651570a3c6ce9c2f4e52557150e0eaf1.pdf} } @article { author = {Moomivand, Hassan}, title = {Investigating the backbreak and reduction in the bench dip with respect to the blastholes dip in surface mines}, journal = {Journal of Mining Engineering}, volume = {9}, number = {25}, pages = {13-23}, year = {2015}, publisher = {Iranian Society of Mining Engineering (IRSME)}, issn = {1735-7616}, eissn = {2676-4482}, doi = {}, abstract = {The broken area between last row of blastholes and remained bench crest at the top part of the blastholes is displaced and attached to the muck pile existing in most of the common blasting operations.  The broken area at the top of the blastholes and unbroken rock at the bench toe rerduces the bench dip with respect to the blasthole dip. Backbreak and reduction of the bench dip with respect to the blasthole dip play important roles on the stability and design of the remained bench wall after blasting.The effects of blastholes and charging parameters have been investigated in this study by various blasting operations in Eyvughly gypsum mine, Rashakan limestone mine, Sungun copper mine and Gholghohar iron mine.including: blasthole diameter, blastholes spacing, burden, stemming, blasthole length, blasthole dip, charge quantity and number of rows in each delay and powder factor on the backbreak distance and varying the reduction of bench dip angle (a) respect to the blastholes dip angle (b).   The results show that backbreak distance (Lb) rises with an increase of the blasthole diameter, blastholes spacing, burden, stemming, blasthole length, number of rows in each delay while it has the best correlation (R=0.880) with the blasthole diameter.  However, the backbreak distance (Lb) has no correlation with each of the three parameters of powder factor (q), ratio of the burden -to- blasthole diameter and blastholes dip (a).  The backbreak distance as a function of six parameters of diameter (fh), blastholes spacing (S), burden (B), stemming (St), blasthole length (H) and number of rows in each delay can be predicted by a multivariable function (R=0.979).  Reduction of bench dip respect to the blastholes dip (a-b) increases with an increase of blasthole diameter, blastholes spacing, burden, stemming, blasthole length and blastholes dip.  Reduction of bench dip respect to the blastholes dip (a-b) as a function of six parameters of diameter (fh), blastholes spacing (S), burden (B), stemming (St), blasthole length (H) and blastholes dip can be predicted by a multivariable relationship with a  high correlation (R=0.986).  Reduction of bench dip respect to the blastholes dip (a-b) has no correlation with each of the three parameters of powder factor (q), number of rows and charge quantity in each delay.  }, keywords = {Blasthole,mine,bench,backbreak,dip}, title_fa = {بررسی عقب زدگی و کاهش شیب پله نسبت به شیب چال‌های انفجاری در معادن روباز}, abstract_fa = {عقب زدگی و موضوعِ کاهش شیب پله نسبت به شیب چال‌های انفجار نقش مهمی در پایداری و طراحی دیواره پله باقیمانده پس ار آتشباری دارند. تأثیر پارامترهای چال انفجار و مشخصات خرج گذاری در معادن روباز شامل: قطر چال، فاصله چال‌ها، بارسنگ، طول گل گذاری، طول چال، شیب چال، طول اضافه حفر چال، مقدار خرج در هر تأخیر و خرج ویژه در دو پارمتر فاصله عقب زدگی و تغییر در کاهش شیب پله نسبت به شیب چال‌های حفر شده حاصل از انفجارهای مختلف در معادن گچ ایواوغلی، آهک رشکان، مس سونگون و آهن گل گهر مورد برسی قرار گرفته است. نتایج نشان می‌دهند که هر یک از پارامترهای فاصله عقب زدگی (Lb) و تغییر در کاهش شیب پله پس از انفجار نسبت به شیب چال‌ها با افزایش پارامترهای قطر چال، فاصله چال‌ها، بارسنگ، طول گل گذاری و طول چال افزایش می یابند و با قطر چال و فاصله چال‌ها همبستگی بیشتری نشان می دهند. هر یک از دو پارامتر Lb و () با پارامترهای طول اضافه حفر چال، مقدار خرج در هر تأخیر و خرج ویژه فاقد همبستگی هستند. رابطه کلی چند متغیره بین هر یک از دو پارامتر Lb و () با ترکیب پنج پارامتر چال انفجار شامل: قطر چال، فاصله چال‌ها، بارسنگ، طول گل گذاری، طول‌چال با استفاده از تحلیل آماری توسط برنامه SPSS با ضریب همبستگی (R) به ترتیب برابر 948/0 و 960/0 حاصل شد. مقدار هریک از پارامترهای فاصله عقب زدگی (Lb) و تغییر در کاهش شیب پله پس از انفجار نسبت به شیب چال‌ها () با استفاده از روابط چند متغیره بدست آمده قابل پیش بینی و کنترل است. پارامتر های چال انفجار تأثیر مهمی در عقب زدگی و شیب پله‌های معادن دارا هستند و روابط ارائه شده برای استفاده در تحلیل پایداری و طراحی شیب پله‌های معادن از دیدگاه آتشباری می توانند مفید باشند.}, keywords_fa = {چال,انفجار,پله,معدن,شیب}, url = {https://ijme.iranjournals.ir/article_12974.html}, eprint = {https://ijme.iranjournals.ir/article_12974_b33e3ad04896f39a0bde869673520a8e.pdf} } @article { author = {Khodadadi, A and Ahmadi, Rahman and عبدالهی, محمود}, title = {Nano bubbles Size Distribution Measurement Using Laser Diffraction Technique}, journal = {Journal of Mining Engineering}, volume = {9}, number = {25}, pages = {24-34}, year = {2015}, publisher = {Iranian Society of Mining Engineering (IRSME)}, issn = {1735-7616}, eissn = {2676-4482}, doi = {}, abstract = {The size distribution of nano-micro bubbles produced by a nano-micro bubble generator was measured by laser diffraction as a reliable and fast method in this investigation. The effects of key parameters including time, type and concentration of frother, gas flow rate and gas type on size distribution of nano-micro bubbles were investigated. The results of nano-micro bubble size as a function of time showed that with the reduction of the absolute zeta potential of nano-micro bubbles and the amount of dissolved oxygen in the solution, the size of nano-micro bubbles was decreased. An increase in the concentration of frother reduces the average size of nano-microbubbles as well as affecting the conventional sized bubbles. It was also revealed that the nano bubbles produced with Aerofroth65 were smaller than those formed with MIBC and Pine oil. It can be concluded the surface tension reduction by Aerofroth65 is more significant than by MIBC and Pine oil. Increased aeration rate (air and oxygen) from 0.1 to 0.3 lmin-1, reduced the average size of nano-micro bubbles. The nano-micro bubbles generated in the presence of oxygen had smaller average size relative to the air nano-micro bubbles because of higher dissolution of oxygen in water in comparison with air and also the higher absolute value of surface zeta potential.}, keywords = {Nano-microbubbles,Nano-bubble generator,Laser Diffraction Technique,Size Distribution,Effective parameters}, title_fa = {توزیع ابعادی نانو میکروحباب ها با روش نوین تفرق اشعه لیزری}, abstract_fa = {چکیده در این مقاله، از روش نوین، دقیق و سریع تفرق اشعه لیزری جهت تعیین توزیع ابعادی نانو – میکروحباب ها استفاده گردید. نانو- میکروحباب ها با استفاده از یک نانوحباب ساز با طراحی خاص بر مبنای پدیده کاویتاسیون در لوله های ونتوری تولید شدند. علاوه بر اندازه گیری ابعاد، پارامترهای مؤثر شامل زمان، غلظت کف ساز، نوع کف ساز، نرخ گازدهی و همچنین نوع گاز بر ابعاد و توزیع ابعادی نانو – میکروحباب ها نیز مورد بررسی قرار گرفتند. نتایج نشان داد که با گذشت زمان، متوسط ابعاد نانو – میکروحباب ها در اثر کاهش میزان اکسیژن محلول در آب و همچنین کاهش مقدار مطلق پتانسیل زتای سطحی، افزایش یافت. افزایش قدرت کف ساز و همچنین افزایش غلظت آن از 30 به 100 ، همزمان با کاهش کشش سطحی فصل مشترک حباب/آب، منجر به کاهش ابعاد نانو- میکروحباب ها شد. افزایش نرخ گازدهی (هوا / اکسیژن) از 1/0 به 3/0 نیز کاهش ابعاد نانو- میکروحباب ها را باعث گردید. علاوه براین، نتایج نشان داد که نانو – میکروحباب های تولید شده به هنگام تزریق گاز اکسیژن به علت بزرگتر بودن مقدار مطلق پتانسیل زتای سطحی و حلالیت بیشتر اکسیژن از متوسط ابعادی کوچکتری نسبت به نانو – میکروحباب های هوا برخوردار هستند.}, keywords_fa = {نانو – میکرو حباب ها,نانوحباب ساز,تفرق اشعه لیزر,توزیع ابعادی,پارامترهای مؤثر}, url = {https://ijme.iranjournals.ir/article_12961.html}, eprint = {https://ijme.iranjournals.ir/article_12961_a19654d1f0e696b49e82e4228eedde02.pdf} } @article { author = {mokhtari, ashkan and monjezi, masoud and مهردانش, امیرحسین}, title = {Application of Multi-Criteria Decision Making Models in Designing Blasting Pattern of Gole-E-Gohar (mine # 1) Iron Mine}, journal = {Journal of Mining Engineering}, volume = {9}, number = {25}, pages = {35-43}, year = {2015}, publisher = {Iranian Society of Mining Engineering (IRSME)}, issn = {1735-7616}, eissn = {2676-4482}, doi = {}, abstract = {Blasting operation play an important role on the downstream processes (i. e., loading, hauling and grinding) of the mining activities. The main objective of this operation is to achieve proper fragmentation and to maintain undesirable phenomena (e.g., fly rock and back break) at lowest possible level. There are several parameters including geometrical features of blasting pattern, rock mass characteristics and explosives' specification affecting blast design. Therefore, blast design is a multi -criteria problem and conventional methods are inaccurate. The application of multi-criteria decision making as an efficient method for attaining blasting operation objectives (proper fragmentation and fly rock- back break reduction) can be beneficial. In this research, Gole-E-Gohar (mine # 1) iron mine is considered as the case study and a database including 75 datasets has been collected. In the first step, using experts' judgment and Paired Comparison Analysis weights of the specified objectives were determined and then various collected blast design patterns were rated with the help of Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). In the next step, employing Goal Programming method, an attempt was made to improve blast objective by designing and modifying geometrical blast pattern. According to the obtained results, the rock fragmentation was improved by 16.86%, whereas fly rock and back break were reduced by 4.26% and 0.17, respectively. }, keywords = {Blasting pattern,Gole-E-Gohar (mine # 1) Iron mine,TOPSIS,Goal Programming Method}, title_fa = {کاربرد مدل های تصمیم گیری چند معیاره در طراحی الگوی انفجار معدن گل‌گهر}, abstract_fa = {عملیات انفجار با توجه به تأثیرگذاری بر سایر بخش‌های فرآیند استخراج مواد معدنی (بارگیری، باربری و سنگ شکنی) از اهمیت بسزائی برخوردار است. در این عملیات ملاک ارزیابی علاوه بر دست‌یابی به خردایش مورد نظر، کاهش پدیده‌های نامطلوب از جمله عقب زدگی و پرتاب سنگ می‌باشد.پارامترهای متعددی مانند مشخصات هندسی شبکه انفجار، خصوصیات توده سنگ و خصوصیات ماده منفجره در طراحی الگوی آتشباری و در نتیجه کیفیت عملیات آتشکاری تاثیرگذار هستند. با توجه به چند شاخصه بودن مسأله و عدم دقت کافی روشهای تجربی استفاده از روش‌های قابل استفاده برای طراحی الگوی مناسب انفجاری که اهداف عملیات (خردایش مورد نظر، کاهش عقب‌زدگی و پرتاب سنگ) را برآورده سازد، ضروری می‌باشد. در این تحقیق، که در آن معدن شماره یک سنگ آهن گل‌گهر به عنوان مطالعه موردی در نظر گرفته شده، در ابتدا با مدل تصمیم-گیری چند‌شاخصه TOPSIS از بین الگوهای انفجاری صورت گرفته در معدن، کاراترین الگو بر اساس اهداف اشاره شده انتخاب می-شود و در ادامه با روش برنامه ریزی آرمانی (GP) سعی شده است تا مقادیر این اهداف بهبود یابد.}, keywords_fa = {الگوی انفجار,معدن گل‌گهر سیرجان,مدل تصمیم‌گیری چندشاخصه TOPSIS,روش برنامه‌ریزی آرمانی}, url = {https://ijme.iranjournals.ir/article_13560.html}, eprint = {https://ijme.iranjournals.ir/article_13560_77fc2c31c080ced0d4195324da5b1f32.pdf} } @article { author = {مهدیلو, اکبر and ایران‌نژاد, مهدی and زارعی, حسین and رضایی, بهرام}, title = {Flotation of smithsonite from Angouran mine tailings}, journal = {Journal of Mining Engineering}, volume = {9}, number = {25}, pages = {45-60}, year = {2015}, publisher = {Iranian Society of Mining Engineering (IRSME)}, issn = {1735-7616}, eissn = {2676-4482}, doi = {}, abstract = {The flotability of smithsonite mineral from Angouran mine tailings containing calcite and quartz as the main gangue minerals was investigated. Using Armac C as a cationic and oleic acid as an anionic collector successful results were obtained in mico flotation experiments showing the cationic flotation at pH=11 is more effective than anionic one. Sodium hexa metaphosphate and sodium silicate were selected as suitable depressants for calcite and quartz minerals, respectively. In the presence of sodium sulfide (Na2S) the optimal dosage of Armac C, sodium silicate and sodium hexa methaphosphate were determined 800, 500 and 250 g/t, respectively. Using sodium hydroxide (415 g/t) as the pH adjuster, the optimal dosage of Na2S is decreased to a half (3000 g/t) while the use of sodium carbonate reduces the Zn grade and recovery without significant decrease in Na2S consumption. At the optimal condition a smithsonite concentrate with 23 % Zn and 79% recovery is obtained.    }, keywords = {Zinc oxide ore,Smithsonite,Flotation,Sulfidation}, title_fa = {بررسی امکان فلوتاسیون اسمیت‌زونیت از باطله های معدنی انگوران}, abstract_fa = {چکیده در این تحقیق امکان فلوتاسیون کانی اسمیت‌زونیت از باطله‌های معدنی انگوران با 7/12 درصد روی که دارای کانی‌های اصلی گانگ شامل کلسیت و کوارتز است، مورد بررسی قرار گرفت. برخلاف آزمایش‌های میکروفلوتاسیون که با استفاده از هر دو کلکتور آرماک سی و اسید اولئیک نتایج مطلوبی به دست آمد، آزمایش‌های فلوتاسیون مکانیکی حاکی از عملکرد بهتر فلوتاسیون کاتیونی در 11=pH است. تحت این شرایط سدیم سیلیکات و سدیم هگزامتافسفات به ترتیب مناسب‌ترین بازداشت‌کننده برای کانی‌های کوارتز و کلسیت انتخاب شدند. مقدار بهینه آرماک سی 800 گرم بر تن، سدیم سیلیکات 500 گرم بر تن و سدیم هگزامتافسفات 250 گرم بر تن تعیین شد. با استفاده از 415 گرم بر تن هیدروکسید سدیم به عنوان تنظیم‌کننده pH، مقدار بهینه سدیم سولفید 3000 گرم بر تن به دست آمد ولی در غیاب آن این مقدار به 5830 گرم بر تن رسید. در شرایط بهینه تعیین شده طی یک مرحله فلوتاسیون (رافر) کنسانتره اسمیت‌زونیت با عیار روی 23 درصد و بازیابی 79 درصد به دست آمد.}, keywords_fa = {کانسنگ اکسیدی روی,اسمیت‌زونیت,فلوتاسیون,سولفیداسیون}, url = {https://ijme.iranjournals.ir/article_12958.html}, eprint = {https://ijme.iranjournals.ir/article_12958_514d18e099d3ba98f25c2921a485376c.pdf} } @article { author = {سنماری, سعیده and جهانی, محمد and فضلی, لیلا and کریمی, آمنه}, title = {Evaluation of hydrocarbon potential Pabdeh Formation using Rock-Eval pyrolysis (well Soro 1)}, journal = {Journal of Mining Engineering}, volume = {9}, number = {25}, pages = {61-69}, year = {2015}, publisher = {Iranian Society of Mining Engineering (IRSME)}, issn = {1735-7616}, eissn = {2676-4482}, doi = {}, abstract = {Rock–Eval pyrolysis has been widely used in the industry to determine the characteristics of sedimentary basins. The aim of this study was to evaluate and compare the hydrocarbon generation power of Pabdeh formation using the Rock-Eval analysis in Soros -1 well in the area of Bandar Abbas. In order to evaluate hydrocarbon generation of Pabdeh formation as the probabale source rock, 25 core samples were collected  in the study area. The variation of S1 + S2 and TOC parameters show that Soros -1 Pabdeh well as the source rock has a good capacity for hydrocarbon generation. According to the diagram of HI versus Tmax of the formation,  kerogen content is mainly of type II and is deposited in a marine environment. Also investigation of Tmax reveal most of the samples from this formation have reached the thermal maturity by paasing the catagenesis point (Tmax higher than 435 ° C) and entered the oil.  }, keywords = {hydrocarbon,source rock,Pyrolysis Rock-Eval,Pabdeh,well Soro-1}, title_fa = {ارزیابی توان هیدروکربونزایی سازند پابده با استفاده از روش پیرولیز راک–اول (در چاه سورو-1)}, abstract_fa = {امروزه استفاده از دستگاه پیرولیز راک- اولEval pyrolysis) Rock-) و نتایج حاصل از آن جهت تعیین و تفسیر خصوصیات واحدهای حوضه های رسوبی متداول می باشد. هدف از این مطالعه بررسی و مقایسه توان هیدروکربورزایی سازند پابده با استفاده از روش آنالیز راک– اول در چاه سورو-1 در ناحیه بندرعباس است. بدین منظور بررسی ژئوشیمیایی سازند پابده به عنوان سنگ منشأ احتمالی با مطالعه تعداد 25 نمونه از مغزه های به دست آمده از چاه در ناحیه مورد مطالعه انجام شد. بررسی تغییرات پارامتر S1+S2 و TOC نشان می دهد که سازند پابده در چاه سورو-1 به عنوان سنگ منشأ توان تولید هیدروکربن زایی خوبی دارد. بر اساس دیاگرام HI در مقابلTmax محتوای کروژن این سازند عمدتاً نوعII و محیط رسوب گذاری این سازند دریائی می باشد. هم چنین با بررسیTmax مشخص شد که بیش تر نمونه های این سازند با رسیدن به مرحله کاتاژنز (Tmax بالاتر از 435 درجه سانتی گراد) توانسته اند مسیر بلوغ حرارتی را طی نمایند و وارد پنجره نفت زایی شوند.}, keywords_fa = {هیدروکربورزایی,سنگ منشأ,پیرولیز راک- اول,پابده,چاه سورو-1}, url = {https://ijme.iranjournals.ir/article_12957.html}, eprint = {https://ijme.iranjournals.ir/article_12957_a983b4bca43b7636842af5658630f555.pdf} } @article { author = {Khorasanizadeh, N. and Farzanegan, A. and Sheikjzadeh, G. A. and Khorasanizadeh, H.}, title = {effect of baffling of flotation column cells using two-phase CFD simulation}, journal = {Journal of Mining Engineering}, volume = {9}, number = {25}, pages = {71-83}, year = {2015}, publisher = {Iranian Society of Mining Engineering (IRSME)}, issn = {1735-7616}, eissn = {2676-4482}, doi = {}, abstract = {The axial mixing in the flotation column leads to lower recovery of minerals. In the present work, the effects of height to diameter ratio and baffling on the axial mixing in flotation columns were investigated using two-phase computational fluid dynamics method. The computational domain is a column with a circular shape cross section having 3.2 m height and a 10 cm diameter. In order to reduce the calculations and simplify the problem, it was assumed that the column is firstly full of water, and then air enters from the side surface of a sparger of 15 cm length and 1 cm diameter. To validate the simulation results, a series of experiments were performed under the above condition in mineral processing laboratory of the University of Kashan. Twhree-dimensional simulation were performed using an Eulerian two-phase model for both the column without baffle and with a baffle located perpendicular to the cross section of the column with 2.8 m length and thickness of 0.4 cm. The predicted pressure values on the wall at heights of 0.2 and 2.6 meter of the column without baffle were in good agreement with experimentally measured values. The relative difference between simulated and measured values was less than 0.6%. Comparison of the computational results for the column without baffle and the one with baffle showed that baffling can reduce the axial velocity of water up to 17% which consequently reduces the axial mixing in the column.  }, keywords = {Column flotation,Axial Mixing,Baffling,Simulation,Computational fluid dynamics,Multiphase Simulation}, title_fa = {بررسی تاثیر تیغـه‌گذاری در ستون فلوتاسیون با استفاده از شبیه‌سازی دینامیک سـیالات محاسباتی دو فازی}, abstract_fa = {تحقیقات نشان داده است که اختلاط در ستون فلوتاسیون کاهش بازیابی ماده معدنی را در پی دارد. در این تحقیق با استفاده از شبیه‌سازی دینامیک سیالات محاسباتی تاثیر تیغه‌گذاری بر اختلاط محوری در ستون فلوتاسیون به صورت دو فازی بررسی شده است. برای میدان محاسباتی از ستونی با مقطع دایره‌ای شکل به طول 2/3 متر و قطر 10 سانتی‌متر استفاده شده است. به منظور کاهش حجم محاسبات و ساده‌سازی مساله ستون از ابتدا پر از آب فرض شده در شرایطی که هوا از سطح جانبی یک حباب‌ساز به طول 15 و قطر 1 سانتی‌متر وارد آن می‌شود. برای اعتبارسنجی نتایج شبیه‌سازی، یک سری آزمایش تجربی با شرایط یاد شده در آزمایشگاه کانه‌آرایی دانشگاه کاشان انجام گرفته ‌است. شبیه‌سازی‌ها به صورت سه بعدی با مدل دو فازی اولرین برای ستون بدون تیغه و نیز ستونی با تیغه‌ای عمود بر مقطع آن انجام گرفته است. مقادیر فشار روی دیواره در ارتفاع 2/0 و 6/2 متری ستون بدون تیغه با مقادیر اندازه‌گیری شده در آزمایش تجربی مقایسه و تطابق آن‌ها با تفاوت کم‌تر از 6/0 % محرز شد. مقایسه نتایج شبیه‌سازی مربوط به ستون با تیغه و بدون تیغه نشان می‌دهد که تیغه‌گذاری سرعت محوری آب را حداکثر تا 17% کاهش می‌دهد و به دنبال آن اختلاط محوری کاهش می‌یابد. }, keywords_fa = {فلوتاسیون ستونی,اختلاط محوری,تیغه‌گذاری,دینامیک سیالات محاسباتی,شبیه‌سازی چند فازی}, url = {https://ijme.iranjournals.ir/article_12977.html}, eprint = {https://ijme.iranjournals.ir/article_12977_84502e65146fb59f43066574596dbf0c.pdf} } @article { author = {کیانپوریان, صادق and اسدی هارونی, هوشنگ and افشاری, سهراب and فرهمندیان, مهران}, title = {Univariate and multivariate outlier detection in exploration geochemistry: A case study of Sari Gunay epithermal gold deposit}, journal = {Journal of Mining Engineering}, volume = {9}, number = {25}, pages = {85-96}, year = {2015}, publisher = {Iranian Society of Mining Engineering (IRSME)}, issn = {1735-7616}, eissn = {2676-4482}, doi = {}, abstract = {Outliers are very important in exploration geochemistry and they can greatly impact the results of the statistical methods especially separation of anomaly from background. Thus, recognition and decision about removal or correction of them is one of the first steps in the analysis of geochemical data processing. Outliers can be identified from a univariate, bivariate, or multivariate perspective based on the number of variables considered, however the bivariate detection is not the aim of this study. Since geochemical data are compositional data, meaning that they represent a closed number system, an appropriate transformation should be used prior to any analysis. The most widely used remedy for this issue is the family of logratio transformation among which the isometric was selected for this study. The data were transformed using the isometric logratio transformation and then boxplot and robust Mahalanobis distance were applied for univariate and multivariate outlier identification respectively. The threshold value for univariate method was the upper inner fence (third quartile plus 1.5IQR), while for Mahalanobis distance an adjusted quantile, deviation of the empirical distribution function of the robust Mahalanobis distance from the theoretical distribution function, was used as the cut off value for identifying outliers. It was demonstrated that regarding the multivariate nature of exploration geochemical data, using multivariate methods for outlier detection is more accurate.  }, keywords = {outliers,compositional data,isometric logratio transformation,box plot,robust Mahalanobis distance}, title_fa = {جداسازی داده های خارج از رده به روش تک متغیره و چند متغیره در داده های ژئوشیمی محدوده طلای اپی ترمال ساری گونای}, abstract_fa = {داده‌های پرت در ژئوشیمی اکتشافی بسیار مهم هستند و می‌توانند اثرات زیادی بر نتایج روش‌های آماری از جمله جداسازی آنومالی از زمینه داشته باشند. بنابراین یکی از اولین مراحل پیش پردازش در تحلیل داده‌های ژئوشیمیایی، تشخیص و تصمیم‌گیری در مورد حذف یا تصحیح آن‌ها است. این داده‌ها را به 3 روش تک متغیره، دو متغیره و چند متغیره می‌توان شناسایی کرد که هدف از این تحقیق جداسازی آن‌ها با استفاده از روش‌های تک متغیره و چند متغیره است. با این حال، با توجه به این که داده‌های ژئوشیمیایی به صورت ترکیبی هستند قبل از هر تجزیه و تحلیلی باید از یک تبدیل مناسب برای رفع این مشکل استفاده کرد. خانواده تبدیل لگاریتمی ریشه‌ای از مناسب‌ترین تبدیل‌ها برای این کار هستند که از بین آن‌ها تبدیل ریشه‌ای ایزومتریک برای این مطالعه انتخاب شد. پس از اعمال تبدیل ایزومتریک بر روی داده‌ها، روش‌های نمودار جعبه‌ای و فاصله‌ی ماهالانوبیس مقاوم به ترتیب برای تشخیص آن‌ها به روش‌های تک متغیره و چند متغیره انتخاب شدند. در روش تک متغیره از چارک سوم به اضافه یک و نیم برابر فاصله‌ی چارکی به عنوان حد آستانه و در روش چند متغیره از یک حد آستانه‌ی تصحیح شده بر اساس تابع توزیع تجربی مربع فاصله ماهالانوبیس مقاوم و تابع توزیع مربع کای برای این کار استفاده شده است. نتایج این مطالعه نشان می‌دهد که با توجه به ماهیت چند متغیره بودن داده‌های ژئوشیمی اکتشافی، استفاده از روش‌های چند متغیره برای تشخیص داده‌های پرت با دقت بیشتری همراه خواهد بود. }, keywords_fa = {کلمات کلیدی: داده های پرت,داده های ترکیبی,تبدیل لگاریتمی ریشه ای ایزومتریک,نمودار جعبه ای,فاصله ماهالانوبیس مقاوم}, url = {https://ijme.iranjournals.ir/article_12978.html}, eprint = {https://ijme.iranjournals.ir/article_12978_2d2a39c6c10c2a0f22c9e8b87ce3c0da.pdf} } @article { author = {Moghaddam, Hadi and Oskouei, Majid and Zekri, Hamid}, title = {Application of Hyperion data to classify ASTER image for mineral detection in Lahroud, Iran}, journal = {Journal of Mining Engineering}, volume = {9}, number = {25}, pages = {97-108}, year = {2015}, publisher = {Iranian Society of Mining Engineering (IRSME)}, issn = {1735-7616}, eissn = {2676-4482}, doi = {}, abstract = {The classification of remote sensing images is one of the important parts of the image analysis.  This study aims to extend the results of Hyperion data processing to ASTER images of Lahrud area for achieving a broader mineralogical distribution map. This method uses the high accuracy Hyperion data as training data set and high coverage ASTER scene for classification purposes. Because of the differences in spectral resolution between ASTER and Hyperion data, the ability of ASTER data to identify the training classes was evaluated and the separability score for the selected areas were calculated. In this study, ten minerals detected by the Mixture Tuned Matched Filtering (MTMF) method on Hyperion image were therefore used as training classes for separability computation. The classes with high similarity (low separability) were combined (six classes were distinguishable). The classification was then performed using three parametric methods of maximum likelihood, minimum distance, mahalonobis distance. The accuracy of the results of each classifier was evaluated by constructing the related confusion matrix. The matrix was computed using the consisted pixels in each training class before and after classification. The maximum likelihood revealed best performance in comparison to the other methods. The abundance maps of the minerals resulted by the mentioned method revealed a high coincidence with geological reports of the area. The widespread sulphate minerals (Gypsum and Polyhalite), the minor occurrences of Malachite around zeolite minerals as a narrow strip, and invasive presence of zeolite minerals like Analcime and Mesolite all are compatible with the geological literatures of the region.  }, keywords = {Remote Sensing,ASTER,Hyperion,Classification,MTMF,confusion matrix,Kappa coefficient}, title_fa = {طبقه ‏بندی تصاویر استر براساس نتایج حاصل از پردازش داده‏های فرا‌طیفی هایپریون از دیدگاه کانی‌شناسی درمنطقه لاهرود}, abstract_fa = { با توجه به هدف اساسی فناوری سنجش از دور مبنی برشناسایی و تفکیک پدیده‏های زمینی، طبقه بندی یکی از مهمترین روش‏های استخراج اطلاعات از تصاویر دورسنجی است. هدف از این مطالعه، تعمیم نتایج پردازش داده‌های ماهواره‌ای هایپریون به تصاویر ماهواره ای استر است. با این کار می‏توان تلفیقی از داده‏های هایپریون با دقت بالا در تشخیص عوارض و داده‏های استر با گسترش بالا در مرحله طبقه‏بندی استفاده کرد. شرط لازم برای این کار ارزیابی قدرت تفکیک داده‏های استر برای کلاس‏های آموزشی حاصل از آنالیز تصاویر هایپریون است که می‏توان با محاسبه امتیاز تفکیک‏پذیری مناطق انتخابی به این هدف رسید. درتحقیق حاضر، 10 کانی تشخیص داده شده از داده‏های هایپریون به روش فیلترینگ تطبیقی میزان‌شده با مخلوط MTMF)) به‌عنوان کلاس‏های آموزشی برروی تصاویراستر فراخوانی و میزان تفکیک‏پذیری طیفی بین کلاس‏های مختلف بررسی شده و در نهایت کلاس‏های مشابه (با تفکیک‏پذیری پایین) با هم ادغام شدند. به این ترتیب 6 کلاس با تفکیک‌پذیری قابل قبول برای انجام طبقه‏بندی تعیین شدند. نقشه طبقه‏بندی در منطقه مورد مطالعه به سه روش پارامتریک حداکثر درست‏نمایی، حداقل فاصله و فاصله ماهالانوبیس تهیه شد و به منظور بررسی میزان کارآیی نقشه‏های به‌دست آمده و مقایسه بین روش‏ها، از ماتریس درهمی بر پایه استفاده از کل پیکسل‏های تصاویر هایپریون به‌عنوان کلاس‌های مبنا استفاده شد. پس از ارزیابی، روش حداکثر درست‏نمایی بهترین عملکرد را نسبت به دو روش پارامتریک دیگر داشت. نقشه فراوانی کانی‌ها با روش‌های به کار گرفته شده در این مطالعه با اطلاعات زمین شناسی منطقه تطابق دارد؛ به نحوی که گسترش بالای کانی‌های سولفاته مانند ژیپس و پلی‌هالیت، نشانه‌های اندکی از کانی مالاکیت با پراکندگی باریک و کم در اطراف کانی‌های زئولیت و گسترش فراوان کانی‌های زئولیتی آنالسیم و مزولیت بر اساس گزارش زمین‌شناسی منطقه قابل توجیه می‌باشند.}, keywords_fa = {استر,هایپریون,طبقه ‏بندی,MTMF,ماتریس درهمی}, url = {https://ijme.iranjournals.ir/article_12979.html}, eprint = {https://ijme.iranjournals.ir/article_12979_709905bb947ca3f44d27ec02c068f34c.pdf} } @article { author = {lashgari, ali and sayadi, ahmadreza and yavari shahreza, mehdi}, title = {A mathematical model for shovel-truck equipment selection to lower loading and hauling cost in surface mines}, journal = {Journal of Mining Engineering}, volume = {9}, number = {25}, pages = {109-117}, year = {2015}, publisher = {Iranian Society of Mining Engineering (IRSME)}, issn = {1735-7616}, eissn = {2676-4482}, doi = {}, abstract = {-}, keywords = {Mathematical modeling,Loading and hauling operations,surface mining,ownership and operating costs}, title_fa = {ارائه مدل انتخاب ناوگان شاول و کامیون با هدف کمینه‌سازی هزینه‌ی واحد عملیات ترابری}, abstract_fa = {انتخاب ناوگان مناسب ترابری در معادن روباز باتوجه به اختصاص بیش از نیمی از هزینه‌ها به عملیات بارگیری و باربری، می‌تواند منجر به کاهش چشم‌گیر هزینه‌های تولید شود. این انتخاب متاثر از تنوع تولیدکنندگان، اندازه، مشخصات فنی و قیمت این ماشین‌آلات، همچنین گوناگونی شرایط محیطی و عملیاتی معادن بوده و فرآیند پیچیده‌ای دارد. در این مقاله مدلی ریاضی برای انتخاب اندازه و تعیین تعداد شاول‌های هیدرولیکی و کامیون‌های موردنیاز، به عنوان رایج‌ترین سیستم بارگیری و باربری، با هدف کمینه‌سازی هزینه‌ی واحد این عملیات ارائه شده است. شرایط فنی، محیطی و عملیاتی در قالب محدودیت‌هایی شامل سازگاری ارتفاع پله‌ی استخراجی معدن و ارتفاع برداشت یا بارگیری شاول، ظرفیت‌های شاول و کامیون موجود در بازار، تأمین ظرفیت معدن‌کاری سالانه، سازگاری ارتفاع تخلیه‌ی شاول و بارگیری کامیون و ظرفیت آن‌ها و کمینه بودن زمان انتظار در مدل لحاظ شده‌اند. این مدل برای حمل و نقل 20 میلیون تن سنگ در سال در معدنی با شرایط مشخص حل و اندازه و تعداد ماشین‌آلات موردنیاز به همراه هزینه‌ی واحد عملیات ترابری تعیین شده است.}, keywords_fa = {مدل‌سازی ریاضی,ناوگان ترابری,معادن روباز,هزینه‌ی عملیات}, url = {https://ijme.iranjournals.ir/article_13562.html}, eprint = {https://ijme.iranjournals.ir/article_13562_f6f7db4a845e638c3fdaff0de4ad7241.pdf} }